SMO 254 Flanges
SMO 254 Nippo Flanges, SMO 254 Pipe Flanges, 150# ANSI SMO 254 Flanges, SMO UNS S31254 Pipe Flanges, ANSI B16.5 SMO 254 Orifice Flange, SMO 254 Spectacle Blind Flange, SMO 254 Spectacle Blind Flanges, SMO 254 Slip On Flanges Supplier in Mumbai, India.
ASTM A182 SMO 254 Threaded Flanges, SMO Werkstoff No 1.4547 Socket Weld Flanges, SMO 254 Nippolet Flanges, SMO 254 RTJ Flange, 254 SMO WNRF Flanges Exporter, SMO 254 Blind Flanges, SMO 254 Weld Neck Flange Dealer in India.
DETAILED INFORMATION
The products at mehtametals.com include a wide range of 254 SMO Flanges that are used in a wide range of commercial and industrial applications, and they are all of high quality. It is common to use SMO Slip On Flanges (UNS S31254) in flue gas desulfurization scrubbers, petroleum production equipment, food processing equipment, and other uses. The SMO 254 Spectacle Blind Flanges have proven to be a cost effective substitute for high nickel and titanium alloys in some applications. It has been developed to be compatible with the common austenitic stainless steels, which are commonly used in our products. It has also been developed to be used in environments containing halide-containing materials, such as seawater, hydrochloric acid, and contaminated sulphuric acid. Aside from that, our customers can also order these SMO 254 Socket Weld Flanges in different sizes and shapes. These threaded flanges have an extremely high copper content when compared to AL-6XN alloy, which is typically higher in chemical composition. According to the original patent for SMO 254 Ring Joint Type Flanges, it was shown that 0.5 % – 1 % copper in stainless steel produced an optimal combination of resistance to reducing acids and chlorides when used at the highest possible concentrations. As with most austenitic stainless steels, SMO 254 Spacer Flanges contain copper as only a residual element. As described herein, the SMO 254 Long Weld Neck Flanges have essentially the same physical properties as other austenitic stainless steels. Despite this, any statistically significant differences in drop-evaporation tests conducted on SMO 254 Nippo Flanges are not considered to be statistically significant.
In piping systems, flanges are used to connect pipes, valves, and pumps. Due to the high concentration of chrome, nickel, and molybdenum in the 254 SMO Flanges, they have excellent corrosion and oxidation-resistant properties. They are available in sizes between 1/8 inch and 24 inch. In the industry, the 254 SMO Slip On Flange is a highly effective flange that is widely used. Assembling these flanges requires only a fillet weld and can be easily slid onto pipes. Almost all pressure classes and sizes are available in this ASTM A182 SMO 254 Slip On Flange. We are the leading supplier of the 254 SMO Pipe Flanges in India and we aim to provide high-quality products at affordable prices. They are easy to maintain and possess a long service life.
These blind flanges are manufactured without hubs or boring centres. They are attached at the ends of hydraulics and high-pressure vessels to stop fluid or gas flow. They can be welded or screwed at the ends. This UNS S31254 Threaded Flange can be used as an outlet for cleaning different piping systems. When screwed, it serves as a companion flange for various piping systems. Generally, these flanges do not require welding to attach to different pipes. They are usually used in low-pressure and noncritical situations. They are designed with a raised or ring-type face and can be used to check the flow rate inside their respective orifices. We can customise all of our products, including the SMO 254 Flanges, to meet your specifications based on their size, shape, and chemical composition.
A 254 SMO Plate Flange is a flat or circular device that allows it to be connected to subsequent pipes. The surrounding area of this system has bolt holes that allow for the easy formation of tees, joints, and junctions. With a protruding hub, the SMO DIN 2.4819 Weld Neck Flange provides support for pipes during vigorous motion. It is a preferred choice in high-pressure applications. 6Mo WNRF Flanges are designed with a density of 8 g/cm3 and a melting point of about 1390 degrees C. They are extremely durable and have good tensile and yield strength along with good elongation properties. ANSI B16.5 254 Socket Weld Flange is designed for small pipes with high pressures. These flanges are very strong and have 50% more fatigue strength than regular slip-on flanges. For more information or for a quote on our products, please contact us.
CITIES WE DELIVER
Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam, Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar, Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh
SMO 254 Flanges Specifications and Standards
Specifications | SMO 254 Flanges |
SMO 254 Flanges Standards | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges. |
ASME B16.5 SMO 254 Flange size range | 1/2" (15 NB) to 48" (1200 NB) DN10~DN5000 |
SMO 254 Flange Standard DIN | 6 Bar 10 Bar 16 Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
SMO 254 Flange Standard ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
SMO 254 Flange Standard UNI | 6 Bar 10 Bar 16 Bar 25Bar 40Bar |
SMO 254 Flange Standard EN | 6 Bar 10 Bar 16 Bar 25Bar 40Bar |
SMO 254 Flange Standard JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
Main Types | Forged / Threaded / Screwed / Plate |
Flange supporting material | Gasket, Ring Joint, Flange Bolts |
Most common types of SMO 254 Flanges |
|
Connect Type/ Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, , Groove |
SMO 254 Pipe Flanges Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Production technique |
|
Special design | As per your drawing AS, ANSI, BS, DIN and JIS 15 NB (1/2") to 200 NB (8") Equal and Reducing Configurations Nickel Threaded Flange, Socket Weld Flange, Slip-On Flange, Blind Flange, Weld Neck Flange |
Specialized manufacturer of |
|
Test | Hydrostatic testing machine, Direct-reading Spectrograph,UI ultrasonic flaw detector, X-ray detector, Magnetic particle detector |
Equipment | Bending machine, Press machine, electric bevelling machine, Pushing Machine, Sand-blasting machine etc |
Origin | West Europe /Indian / USA / Japan / Korean |
SMO 254 Flanges Standard | ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange
|
Key markets and industries for SMO 254 Flanges |
|
Export to | Indonesia, Ireland, Ukraine, Singapore,Saudi Arabia,Canada, Peru, Dubai, Brazil, Iran, Korea, USA, India, Egypt, Thailand, Spain, Oman etc |
SMO 254 Flanges Application |
|
Chemical Composition of Grade SMO 254 Pipe Flanges
Grade | % | Ni | Cr | Mo | Cu | N | C | Mn | Si | P | S |
SMO 254 | Min. | 17.5 | 19.5 | 6 | 0.5 | 0.18 | |||||
Max. | 18.5 | 20.5 | 6.5 | 1 | 0.22 | 0.02 | 1 | 0.8 | 0.03 | 0.01 |
Mechanical Properties of ASTM A182 SMO 254 Plate Flanges
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
SMO 254 | 8.0 g/cm3 | 1320-1390 ℃ | 650 | 300 | 35 % |
UNS S31254 Physical Properties
Density (Kg.m-1) | 8000 |
Magnetic Permeability | <1.05 |
Young’s Modulus (N/mm2) | 200 x 103 |
Specific Heat, 20°C (J.Kg-1.°K-1) | 500 |
Specific Electrical Resistance, 20°C (µO.m) | 0.85 |
Thermal conductivity, 20°C | 13.5 |
Equivalent Grades of ASME SA182 SMO 254 Flanges:
STANDARD | WERKSTOFF NR. | UNS | JIS | SIS | GOST | AFNOR | EN |
SMO 254 | 1.4547 | S31254 | – | 2378 | – | Z1 CNDU 20.18.06Az | X1CrNiMoCuN20-18-7 |
Types of SMO 254 Flanges
SMO 254 Slip On Flanges | SMO 254 Raised Face Slip On Flanges 254 SMO Slip On Plate Flanges 254 SMO Slip On Flanges SMO UNS S31254 Slip On Flanges SMO WERKSTOFF NR. 1.4547 45 SORF Flanges ASME SA182 254 Slip On Flanges |
SMO 254 Weld Neck Flanges | SMO 254 Raised Face Weld Neck Flanges 254 SMO Weld Neck Flanges 254 SMO Weld Neck Flange SMO UNS S31254 Weld Neck Flanges SMO WERKSTOFF NR. 1.4547 Weld Neck Flange ASTM A182 304 SMO WNRF Flange |
SMO 254 Blind Flanges | SMO 254 Raised Face Blind Flanges 254 SMO Blind Flanges 254 SMO Blind Flange SMO UNS S31254 Blind Flanges SMO WERKSTOFF NR. 1.4547 Blind Flange ASTM A182 254 SMO BLRF Flanges |
SMO 254 Orifice Flanges | SMO 254 Orifice Flanges 254 SMO Orifice Flanges 254 SMO Orifice Flanges SMO UNS S31254 Orifice Flanges SMO WERKSTOFF NR. 1.4547 Orifice Flanges A182 254 SMO Orifice Flanges |
SMO 254 Socket weld Flanges | SMO 254 Socket weld Flanges 254 SMO Socket weld Flanges 254 SMO Socket weld Flanges SMO UNS S31254 Socket weld Flanges SMO WERKSTOFF NR. 1.4547 SWR Flanges ASME B16.5 254 SMO Socket weld Flanges |
SMO 254 Threaded Flanges | SMO 254 Threaded Flanges 254 SMO Threaded Flanges 254 SMO Threaded Flanges SMO UNS S31254 Threaded Flanges SMO WERKSTOFF NR. 1.4547 Threaded Flanges ASTM A182 SMO 254 Threaded Flanges |
SMO 254 Long weld Neck Flanges | SMO 254 Long weld Neck Flanges 254 SMO Long weld Neck Flanges 254 SMO Long weld Neck Flanges SMO UNS S31254 Long weld Neck Flanges SMO WERKSTOFF NR. 1.4547 Long weld Neck Flanges ASTM A182 254 SMO Long weld Neck Flanges |
SMO 254 RTJ Flanges | SMO 254 Ring Type Joint Flanges 254 SMO Ring Type Joint Flange 254 SMO RTJ Flanges SMO UNS S31254 RTJ Flanges SMO WERKSTOFF NR. 1.4547 RTJ Flanges BS4504 SMO 254 RTJ Flanges |
SMO 254 Reducing Flanges | SMO 254 Reducing Flanges 254 SMO Reducing Flanges 254 SMO Reducing Flange SMO UNS S31254 Reducing Flanges SMO WERKSTOFF NR. 1.4547 Reducing Flange ASTM A182 SMO 254 Reducing Flanges |
SMO 254 Forged Flanges | SMO 254 Forged Flanges 254 SMO Forged Flange 254 SMO Forged Flange SMO UNS S31254 Forged Flanges SMO WERKSTOFF NR. 1.4547 Forged Flanges ASTM A182 SMO 254 Forged Flanges |
SMO 254 Spectacle Blind Flange | SMO 254 Spectacle Blind Flange Incoloy® SMO 254 Spectacle Blind Flange SMO 254 Spectacle Blind Flange Alloy UNS N08020 Spectacle Blind Flange Alloy WERKSTOFF NR. 2.4660 Spectacle Blind Flange ASTM B462 SMO 254 Spectacle Blind Flange |
SMO 254 Spade Flange | SMO 254 Spade Flange Incoloy® SMO 254 Spade Flange SMO 254 Spade Flange Alloy UNS N08020 Spade Flange Alloy WERKSTOFF NR. 2.4660 Spade Flange ASTM B462 SMO 254 Spade Flange |
ASTM A182 SMO 254 Flange Standards / Types And Pressure Class :
ASME/ANSI B 16.5 | Slip on Flange, Welding Neck Flange,Blind Flange, Threaded Flange, Socket Weld Flange,High Hub Blind Flange, Lap Joint Flange, Ring Type Joint Flange |
PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
ASME/ANSI B 16.47 | Welding Neck Flange, Blind Flange [Series A & B] |
PRESSURE CLASS | 75, 150, 300, 400, 600, 900 |
ASME/ANSI B 16.36 | Slip on Flange, Welding Neck Flange, Threaded Flange |
PRESSURE CLASS | 300, 400, 600, 900, 1500, 2500 |
BS 4504 SEC 3.1 | Plate Flange,Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange |
PRESSURE CLASS | PN 2.5 TO PN 40 |
BS 4504[PART 1] | Hubbed Slip-On Hubbed Threaded, Plate Flange, Welding Neck Flange, Loose Plate With Weld On Plate Collar, Blank Flange |
PRESSURE CLASS | PN 2.5 TO PN C276 |
BS 1560 BOSS | Socket Welding Flange, Welding Neck Flange,Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange |
PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
BS10 | Blind Flange, Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange |
TABLE | D, E, F, H |
DIN FLANGES | DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 |
PRESSURE CLASS | PN 6 TO PN 100 |
ASTM A182 F44 UNS S31254 254 SMO Flanges Latest Price List
Check ANSI / ASME B16.5 ASTM A182 SMO 254 Slip On Flange & Orifice Flange pressure class and dimensions
- 254 SMO Flanges
FOB Price: US $0.1-1000000 / Piece - 1.4574 Flanges, S31254 Flanges, 254 SMO flanges
FOB Price: US $1-1000 / Piece - Top Quality S31254,1.4547,254 SMO Stainless Steel Flange and Ring Manufacturer!!!
FOB Price: US $10-1000 / Piece - blind slip-on welding neck 254 SMO/UNS S31254/W.Nr.1.4547/6Mo/ASTM A182 F44 Flange
FOB Price: US $100-10000 / Piece - UNS S31254 ASTM A182 F44 Weld neck 5'' flange
FOB Price: US $1-300 / Kilogram - blind slip-on welding neck 254 SMO/UNS S31254/W.Nr.1.4547/6Mo/ASTM A182 F44 Flange
FOB Price: US $0.1-1000 / Piece - blind slip-on welding neck 254 SMO/UNS S31254/W.Nr.1.4547/6Mo/ASTM A182 F44 Flange
FOB Price: US $100-10000 / Piece - ASTM A182 F44 / 254SMO Socket Welding SW Flange
1 Piece (Min. Order) - blind slip-on welding neck 254 SMO/UNS S31254/W.Nr.1.4547/6Mo/ASTM A182 F44 Flange
FOB Price: US $0.1-1000 / Piece - ASTM A182 F44 weld neck flange made in China
FOB Price: US $1-100 / Piece - ASTM A182 F44 Stainless Steel Flange
FOB Price: US $0.48-200 / Piece - Astm a182 f44 Forged Flange
FOB Price: US $1500-1600 / Ton - ASTM A182 F44 / 254SMO Threaded Flange
1 Piece (Min. Order) - ASTM A182 F44 / 254SMO Socket Welding SW Flange
1 Piece (Min. Order) - ASTM A182 F44 UNS S31254
FOB Price: US $1500-1600 / Ton - ASTM A182 UNS S31254
FOB Price: US $1500-1600 / Ton
Weight Chart of 254 SMO™ Flanges
15mm (1/2") SMO 254 Flange Weight Chart
Standard | Class | Diameter | Bolt Circle Diameter | Number of Bolts | Bolt Size | Diameter of Bolt Hole |
AS4087 Flanges | PN14 Flanges | 95 | 67 | 4 | M12 | 14 |
AS 2129 Flange | Table C Flanges | 95 | 67 | 4 | 13 | 14 |
Table D Flanges | 95 | 67 | 4 | 13 | 14 | |
Table E Flanges | 95 | 67 | 4 | 13 | 14 | |
Table F Flanges | 95 | 67 | 4 | 13 | 14 | |
Table H Flanges | 114 | 83 | 4 | 16 | 17 | |
Table J Flanges | 114 | 83 | 4 | 16 | 17 | |
ANSI B16.5 Flanges | ANSI 150 Flanges | 89 | 60 | 4 | 13 | 16 |
ANSI 300 Flanges | 95 | 67 | 4 | 13 | 16 | |
ANSI 600 Flanges | 95 | 67 | 4 | 13 | 16 | |
ANSI 900 Flanges | 121 | 83 | 4 | 19 | 22 | |
ANSI 1500 Flanges | 121 | 83 | 4 | 19 | 22 | |
ISO 7005 (DIN) Flange | PN6 Flanges | 80 | 55 | 4 | M10 | 11 |
PN10 Flanges | 95 | 65 | 4 | M12 | 14 | |
PN16 Flanges | 95 | 65 | 4 | M12 | 14 | |
PN20 Flanges | 90 | 60.5 | 4 | M14 | 16 | |
PN25 Flanges | 95 | 65 | 4 | M12 | 14 | |
PN40 Flanges | 95 | 65 | 4 | M12 | 14 |
Dimension Table of 254 SMO Plate Flange
Standard | Class | Diameter | Bolt Circle Diameter | Number of Bolts | Bolt Size | Diameter of Bolt Hole |
AS4087 | PN14 | 95 | 67 | 4 | M12 | 14 |
AS 2129 Flange | Table C | 95 | 67 | 4 | 13 | 14 |
Table D | 95 | 67 | 4 | 13 | 14 | |
Table E | 95 | 67 | 4 | 13 | 14 | |
Table F | 95 | 67 | 4 | 13 | 14 | |
Table H | 114 | 83 | 4 | 16 | 17 | |
Table J | 114 | 83 | 4 | 16 | 17 | |
ANSI B16.5 | ANSI 150 | 89 | 60 | 4 | 13 | 16 |
ANSI 300 | 95 | 67 | 4 | 13 | 16 | |
ANSI 600 | 95 | 67 | 4 | 13 | 16 | |
ANSI 900 | 121 | 83 | 4 | 19 | 22 | |
ANSI 1500 | 121 | 83 | 4 | 19 | 22 | |
ISO 7005 (DIN) Flange | PN6 | 80 | 55 | 4 | M10 | 11 |
PN10 | 95 | 65 | 4 | M12 | 14 | |
PN16 | 95 | 65 | 4 | M12 | 14 | |
PN20 | 90 | 60.5 | 4 | M14 | 16 | |
PN25 | 95 | 65 | 4 | M12 | 14 | |
PN40 | 95 | 65 | 4 | M12 | 14 |
WIDEST STOCK OF 254 SMO FLANGES
- SMO 254 Industrial Flanges
- SMO 254 Slip On Flange Manufacturer
- ASME SA182 254 SMO Flat Flanges
- UNS S31254 Threaded Flanges
- ASME B16.5 SMO 254 Plate Flanges
- ASTM A182 SS 254 SMO® Pipe Flange
- SMO 254 Forged Flange
- 1.4547 SORF Flanges
- UNS S31254 Orifice Flanges
- SMO 254 Socket weld Flange Supplier
- Class 150 SMO 254 Blind Flanges
- UNS S31254 Screwed Flanges
- 1.4547 SORF Flanges
- SMO 254 BLRF Flanges
- SMO 254 Reducing Flanges Stock
- 254 SMO Tongue & Groove Flanges
- Grade 254 SMO WN RTJ Flanges
- 1.4547 WNFF (Weld Neck Face Flanges)
- SMO 254 Pipe Flanges
- 254 Square SMO Flanges
- SMO 254 Long Weld Neck Flanges
- 254 SMO Spectacle Blind Flanges
- ASTM A182 254 SMO Ring Type Joint Flange
- SMO 254 Lap Joint Flanges
Quality-
A key element of our initiative is that we ensure that finished products are of high quality according to global industrial standards. We implement a quality management system in which a variety of testing processes are carried out by experts. Mehtametals manufactures flanges that go through various testing and testing processes, including material tests, destructive tests, and non-destructive tests. To ensure quality, we ensure that only superior quality materials are used in the manufacturing process in order to ensure our quality standards are met. In order to verify the functionality of flanges in severe applications, we assure the workability of our products. In our testing facility, we have the most advanced and advanced technology which enables us to generate accurate analysis of our products.
Metallurgical tests-
- Analysing the chemical composition
- Testing hydrodynamics
- Tests for intergranular corrosion
- Tests for flattening
- Positive identification of materials
- Tests using ultrasonic waves
- Corrosion test using pitting
Destructive and non- destructive tests-
- A mechanical properties test will be conducted
- A hardness test is performed
- A tensile test is performed
- A compression test is performed
- A leakage test is conducted
- A pressure test is conducted
- The micro/macroscopic test
- Radiology
Certifications-
Through our ISO accreditation, we are able to assure the quality of our products.
Documentations-
- Invoices for products
- Welding specifications and guidelines
- Certifications of disinfection
- Test results from NABL
- Legalised manufacturers must provide certificates of origin
Test reports -
- Test report for raw materials
- Reports on mill tests
- A quality assurance plan should be in place
- Graphs of heat treatment
- 3.1 or 3.2 MTC report according to EN 10204
SMO 254 Flanges Application Industries
- Companies engaged in offshore oil drilling
- Generation of electricity
- The petrochemical industry
- Processing of gas
- Chemicals of special interest
- The pharmaceutical industry
- Equipment for the pharmaceutical industry
- Equipment for Chemicals
- Equipment for sea water
- Exchangers of heat
- The condensers
- Industry of pulp and paper
Distribution Network
Our Products
Contact Us
Send Us Message
Got a question? We'd love to hear from you. Send us a message & we'll respond as soon as possible.
Call Us
8080998069 | 9820584986
Visit Us
1st Floor, Plot No. 136, Deccan Chambers, JSS Road, Ambewadi, Mumbai 400004