Hastelloy C276 Round Bars
Hastelloy C276 Bar, ASTM B574 Hastelloy C276 Round Bars, Hastelloy WERKSTOFF NR. 2.4819 Round Bars , Hastelloy GOST ХН65МВУ Cold Drawn Round Bar, Hastelloy UNS N10276 Bright Bar
Suppliers of ASTM B574 Hastelloy C276 Hex Bar, C276 Hastelloy Alloy Forged Bars Exporter, C276 Alloy Black Bar, ASTM B574 Alloy C276 Threaded Bar, Alloy C276 Square Bar, Hastelloy C276 Hexagonal Bar, Hastelloy Alloy C276 Rods.
DETAILED INFORMATION
Among the benefits of using Hastelloy C276 rods is their excellent corrosion resistance in both oxidizing and reducing environments. Due to its high molybdenum and chromium content, as well as the addition of tungsten, 2.4819 Alloy C 276 is highly resistant to chlorine-induced stress corrosion cracking. Because of these elements in the alloy, the ASTM B574 UNS N10276 alloy can also resist general corrosion, such as pitting and crevice corrosion.
The Hastelloy C276 Bar Stock can be used at temperatures up to 1900°F or 1038°C in environments containing oxidative chemicals. As a result of its low chromium content, Hastelloy C276 Round Bar cannot function or provide good resistance in oxidative media such as hot, concentrated nitric acid. As a result of its low carbon content, ASTM B574 N10276 does not precipitate carbide, so it can be used for welding.
Despite the fact that alloy C276 Round Bar cannot be hardened by heat treatment, cold working can. The work hardening rate of Hastelloy C276 Hex Bar is higher than that of conventional austenitic stainless steels, so that should be considered. It is easy to weld and process Hastelloy C276 Flat Bar in a shop using standard fabrication methods, just as it is with conventional austenitic stainless steels and nickel-based alloys.
When stainless steel, Alloy 400, and Alloy 625 fail under crevice conditions, the Hastelloy C276 Bar performs well in marine environments. For the recovery and processing of sour natural gas containing hydrogen sulfide, carbon dioxide, and chlorides, ASTM B574 N10276 is widely used.
Carbon and alloy steels tend to fail due to corrosion cracking or stress cracking caused by sulfur in deep wells due to their corrosive environments. Hastelloy C-276 Round Bars are thick at 2050°F, rapidly quenched with an average Olsen cup depth of 0.48". They can be forged, hot-upset, and impact extruded.
In dissimilar welding applications, such as nickel-chromium-molybdenum alloys and stainless steels, C276 alloy bars are used as matching composition fillers.
Prior to final fabrication or installation, parts hot-formed in HASTELLOY C-276 alloy Bars should be solution heat-treated whenever possible. During tests, HASTELLOY C-276 alloy Rods showed corrosion rates of less than 5MPY (0.13 mm/y) at temperatures below boiling points and concentrations below 65 wt%. In Alloy C276 Rods, boiling 45% magnesium chloride (ASTM Standard G 36) is often used to test the resistance to this extremely destructive attack.
Among the largest exporters and manufacturers of steel and alloy bars in the world is Troinxalloys.com & alloys. By far, this company has proven its worth to its clients and offers its services based on various quality and quantity criteria. This company provides a wide range of Hastelloy C276 Bars to its clients. These bars are available in a variety of sizes and shapes, based on the client's specifications. Hastelloy C276 bars are manufactured using top-quality Hastelloy alloy. These bars are offered to global buyers at reasonable rates, so buying in large quantities is feasible.
Nickel, molybdenum, and chromium are used in Hastelloy C276's alloy, which gives it some excellent mechanical properties. In addition to its corrosion resistance, the Hastelloy C276 Round Bar has high formability, ductility, and weldability, just as the other nickel-based alloys do. In chloride environments, it also has increased resistance to stress corrosion cracking. As one of the most versatile products available, the Hastelloy round bar is easy to fabricate using standard techniques.
CITIES WE DELIVER
Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam, Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar, Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh
Hastelloy C276 Round Bar Specification
Specification | ASTM B574, ASTM B574 UNS N10276, NACE MR-01-75, ASME SB574 Bar Products, AMS 5750 (Hastelloy C, UNS N10002), Inconel C276 (trademark), Werkstoff Nr. 2.4819, ASTM B751, DIN 17744, DIN 17751, DIN 17750 and DIN 17752,VRC276 |
Grade | Hastelloy C276 – UNS N10276 |
UNS N10276 Hex Bar size | 2-100mm A/F |
ASTM B574 Hastelloy C276 Round bar size | Diameter: 3-~C276mm |
ASTM B574 Hastelloy C276 Square bar size | 4 to 100mm |
N10276 Flat bar size | Thickness: 2 -100mm |
Width: 10 to 500mm | |
Hastelloy C276 Rectangles Size | 33 x 30mm to 295 x 1066mm |
ASTM B574 N10276 Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
UNS N10276 Section | 3.0 to 12.0mm thickness |
Hastelloy C276 AMS 5666 Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
N10276 Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
ASTM B574 N10276 Billet Size | 1/2" to 495mm Diameter |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Surface | Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline, Polished |
Condition | Hardened & tempered, annealed |
Technique | Hastelloy C276 Cold Drawn, Hot Rolled, Forged Round Bar,Cold Rolled, Rod |
Processing | Bar cutting to 650mm |
Form | Hastelloy C276 Round, Welding Rod, T-Bar, Rod, Precision Ground Bar, Channel Bar, Square, Flat Bar, Blocks, Round Rod, Hollow, Rings, Rectangle, Hex (A/F), Triangle, Threaded, Profiles, Billet, Ingot, I/H Bar, Half Round Bar, Forging, etc. |
Our stockyard location for fast delivery across India | Hyderabad, Noida, Shivamogga, Pimpri-Chinchwad, Agra, Coimbatore, Chennai, Tiruchirappalli, Tirunelveli, Bhubaneswar, Mumbai, Pune, Bengaluru, Ahmedabad, Thiruvananthapuram, Dhanbad, Navi Mumbai |
Our Hastelloy C276 Round bar conforms to NACE MR0175/ISO 15156 |
Hastelloy C-276 Chemical Composition
(Ni) Nickel | Remainder |
(Mo) Molybdenum | 15.0 to 17.0 |
(Cr) Chromium | 14.5 to 16.5 |
(Fe) Iron | 4.0 to 7.0 |
(W) Tungsten | 3.0 to 4.5 |
(Co) Cobalt | 2.5 max |
(Mn) Manganese | 1.0 max |
(V) Vanadium | 0.35 max |
(Si) Silicon | 0.08 max |
(P) Phosphorus | 0.04 max |
(S) Sulfur | 0.03 max |
(C) Carbon | 0.010 max |
Hastelloy C-276 Mechanical Properties.
Product Form | Tensile (ksi) | .2% Yield (ksi) | Elongation % |
Bar | 110.0 | > 52.6 | 62 |
Plate | 107.4 | 50.3 | 67 |
Sheet | 115.5 | 54.6 | 60 |
Tube & Pipe | 105.4 | 45.4 | 70 |
Hastelloy Alloy C276 Bars Equivalent Grades
STANDARD | WERKSTOFF NR. | UNS | GOST | AFNOR | JIS | OR | EN |
Hastelloy C276 | 2.4819 | N10276 | ХН65МВУ | - | NW 0276 | ЭП760 | NiMo16Cr15W |
Features of Hastelloy C276 round bar:
- There is a separator between each radius of a U-Bend tube.
- Plastic strips are used to strap bundles together.
- To protect against extreme weather, every bundle is covered with plastic.
- Plastic caps protect the ends of Hastelloy C276 round bars.
Benefits of Hastelloy C276 Bar
- Alloy C276 bars with precision tolerances
- Tolerance for close lengths
- Hollow Hastelloy C276 bars that have been precision straightened
- Hastelloy C276 Bright Bar with Mirror Finish
- The packaging of Hastelloy C276 bars is unique
- SCADA-controlled heat treatment
- Round bars, hex bars, and square bars are available
- All major international specifications are met by Nickel C276 Bar
- Rotating Probe, Ultrasonic / Magnetic Particle Eddy Current testing
C276 Hastelloy Alloy Round Bar Condition
H&T | Hardened and tempered. |
ANN | Annealed |
PH | Precipitation hardened. |
Other Types Hastelloy C276 Round Bar
Hastelloy C276 Round Bars | Hastelloy C276 Round Rods Supplier |
Hastelloy UNS N10276 Bars | Hastelloy Alloy NW NW 0276 Bars Exporter |
ASTM B574 C276 Hastelloy Alloy Black Bar Supplier | C276 Hastelloy Polished Bar Distributor |
Alloy C276 Bars Supplier | ASME SB574 Hastelloy C276 Bars |
UNS N10276 Bar | Hastelloy C276 Black Bars |
Hastelloy DIN 2.4819 Round Bars | Hastelloy C276 Forged Bar |
C276 Alloy Bars Exporter | Hastelloy C276 Bright Bar |
WNR 2.4819 Hex Bars | ISO Certified Hastelloy C276 Round bars |
C276 Hastelloy Black Bars | C276 Hastelloy Threaded Bars |
Hastelloy Alloy Round Bars Exporter | Hastelloy C276 Rectangle Bar Stockist |
Bright Bar Manufacturer | Hex Bars |
C276 Hastelloy Round Bar Length
- Standard length is 9 - 12 meters in the metric system
- 40 feet in the USA
Round Bar | ||||||||
Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr |
3mm | 0.017 | 0.055 | 20mm | 0.753 | 2.470 | 3" | 10.900 | 35.762 |
1/8" | 0.019 | 0.062 | 22mm | 0.908 | 2.979 | 3-1/4" | 12.800 | 41.996 |
5/32" | 0.029 | 0.095 | 7/8" | 0.926 | 3.038 | 3-1/2" | 14.850 | 48.772 |
4mm | 0.030 | 0.098 | 24mm | 1.080 | 3.543 | 3-3/4" | 17.001 | 55.780 |
3/16" | 0.043 | 0.141 | 25mm | 1.180 | 3.871 | 4" | 19.306 | 63.340 |
5mm | 0.047 | 0.154 | 1" | 1.210 | 3.970 | 4-1/4" | 21.908 | 72.249 |
7/32" | 0.058 | 0.190 | 26mm | 1.271 | 4.170 | 4-1/2" | 24.4487 | 80.340 |
6mm | 0.068 | 0.223 | 27mm | 1.368 | 4.490 | 4-3/4" | 27.366 | 90.249 |
1/4" | 0.076 | 0.249 | 1-1/8" | 1.534 | 5.033 | 5" | 30.461 | 99.940 |
7mm | 0.091 | 0.298 | 30mm | 1.691 | 5.548 | 5-1/2" | 36.690 | 121.000 |
5/16" | 0.118 | 0.387 | 1-1/4" | 1.924 | 6.349 | 6" | 43.860 | 143.900 |
8mm | 0.120 | 0.398 | 32mm | 1.894 | 6.314 | 6-1/2" | 51.093 | 167.630 |
9mm | 0.152 | 0.498 | 1-3/8" | 2.303 | 7.550 | 7" | 59.432 | 196.000 |
3/8" | 0.170 | 0.557 | 35mm | 2.390 | 7.553 | 7-1/2" | 68.226 | 225.000 |
10mm | 0.189 | 0.620 | 36mm | 2.438 | 7.999 | 8" | 77.586 | 254.55 |
11mm | 0.228 | 0.748 | 38mm | 2.792 | 8.903 | 10" | 121.048 | 397.140 |
7/16" | 0.232 | 0.761 | 1-1/2" | 2.715 | 8.951 | |||
12mm | 0.271 | 0.889 | 40mm | 3.009 | 9.872 | |||
1/2" | 0.303 | 0.994 | 1-5/8" | 3.200 | 10.449 | |||
13mm | 0.318 | 1.043 | 1-3/4" | 3.712 | 12.179 | |||
14mm | 0.368 | 1.207 | 45mm | 3.807 | 12.555 | |||
9/16" | 0.383 | 1.256 | 1-7/8" | 4.260 | 13.977 | |||
15mm | 0.424 | 1.391 | 48mm | 4.330 | 14.205 | |||
5/8" | 0.473 | 1.551 | 50mm | 4.698 | 15.414 | |||
16mm | 0.481 | 1.578 | 2" | 4.848 | 15.906 | |||
17mm | 0.543 | 1.791 | 2-1/8" | 5.475 | 17.963 | |||
11/16" | 0.573 | 1.880 | 2-1/4" | 6.135 | 20.128 | |||
18mm | 0.610 | 2.001 | 60mm | 6.768 | 22.205 | |||
3/4" | 0.682 | 2.237 | 2-3/8" | 6.838 | 22.435 | |||
2-1/2" | 7.576 | 24.856 | ||||||
2-5/8" | 8.354 | 27.409 | ||||||
2-3/4" | 9.169 | 30.083 |
Size & Dimensions of Hastelloy C276 round bar
Metric | US Bar | ASTM/ Canadian | Japanese | ||||
Bar Size | Diam. (mm) | Bar Size | Diam. (Inch) | Bar Size | Diam. (mm2) | Bar Size | Diam. (mm) |
5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
7 | 7 | #5 | 0.625 | 25M | 500 | 16 | 16 |
8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
12 | 12 | #10 | 1.250 |
|
| 32 | 32 |
14 | 14 | #11 | 1.375 |
|
| 35 | 35 |
16 | 16 | #12 | 1.500 |
|
| 38 | 38 |
18 | 18 | #13 | 1.625 |
|
| 41 | 41 |
20 | 20 | #14 | 1.750 |
|
| 44 | 44 |
22 | 22 | #15 | 1.875 |
|
| 48 | 48 |
25 | 25 | #16 | 2.000 |
|
| 51 | 51 |
28 | 28 | #18 | 2.250 |
|
| 57 | 57 |
32 | 32 |
|
|
|
|
|
|
36 | 36 |
|
|
|
|
|
|
40 | 40 |
|
|
|
|
|
|
44 | 44 |
|
|
|
|
|
|
50 | 50 |
|
|
|
|
|
|
Hastelloy C276 round bar suppliers offer a variety of shapes, including round bars, square bars, hexagonal bars, flat bars, channels, hollow bars, and more.
Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
Hastelloy UNS N10276 Cold Drawn and Polish Round Bar | 3.00 – 75.00 | 1/8" – 3.00" | h8-h9-h10-h11 |
Alloy C276 Cold Drawn and Ground Bar | 10.00 – 75.00 | 5/6" – 2.50" | h8-h9-h10-h11 |
C276 Hastelloy Peeled and Polished Round Bar | 40.00 – 150.00 | 1.50" – 6.00" | h11, h11-DIN 1013 |
Hastelloy Alloy C276 Peeled and Ground Bar | 20.00 – 50.00 | 3/4″ – 2.00" | h9-h10-h11 |
Hastelloy C276 Round Bar Surface finish
CD | Cold drawn | P | Polished |
BD | Bright drawn | SRE | Slit rolled edge |
CG | Centreless ground | HF | Hot finished |
CF | Cold finished | HRAP | Hot rolled annealed and pickled |
P&T | Peeled and turned | RT | Rough turned/peeled |
ST | Smooth turned | PR | Peeled and reeled |
Price Of Hastelloy C276 Round Bar
- US / Metric Tons of Hastelloy C276 Hot Rolled Round Bars (FOB Price) available upon request
- Alloy C276 Rods (FOB Price)
- US / Metric Ton Hastelloy C276 Bars (FOB Price upon request) ASTM B574 Hastelloy C276 Bars
- On request, Hastelloy C276 Square Bars (FOB Price)
- Hex bar Hastelloy C276 US / Ton (FOB Price)
- Hastelloy C276 Round Bars with Cold Finish US/Ton (FOB Price)
Application Industries
- Construction
- Bridges
- Petrochemical Industry
- Ship Building
- Engineering
- General Structural Purposes
- Offshore and Onshore Services
Distribution Network
Our Products
Contact Us
Send Us Message
Got a question? We'd love to hear from you. Send us a message & we'll respond as soon as possible.
Call Us
8080998069 | 9820584986
Visit Us
1st Floor, Plot No. 136, Deccan Chambers, JSS Road, Ambewadi, Mumbai 400004