Super Duplex S32760 Round Bars

Super Duplex Steel UNS S32760 Bright Bar, Super Duplex Steel S32760 Flat Bars, ASTM A276 Super Duplex Steel Round Bar, Super Duplex S32750 Rods Manufacturer in Mumbai, India.

Dealer of Super Duplex S32760 Round Bar, Super Duplex UNS S32760 Rods, S32760 Super Duplex Steel Flat Bars, 2507 Super Duplex Steel Round Bar, S32760 Super Duplex Threaded Bar, Super Duplex DIN 1.4410 Polish Bar Stock, ASME SA276 Super Duplex S32760 Forged Bar Exporter, Super Duplex S32760 Cold Finish Round Bar Dealer, Super Duplex S32760 Round Bar Manufacturer in India.

DETAILED INFORMATION

Super Duplex UNS S32750 Round Bars are offered by Mehtametals.com, a leading manufacturer and supplier of these products. UNS S32760 Round Bars offer excellent corrosion resistance to a wide variety of media, along with outstanding resistance to pitting and crevice corrosion in saltwater and chloride-containing environments, with a Critical Pitting Temperature of more than 50°C. It is suitable for temperatures up to 300 degrees Celsius due to the microstructure of the duplex steel. Super Duplex UNS S32750 Bars have a low coefficient of thermal expansion and a higher heat conductivity than austenitic steel.

A special alloy for sour service, UNS S32760 Round Bars has been approved by ASME for pressure vessel applications. Due to the high nitrogen, chrome, and molybdenum content of Duplex steels Din 1.4501 Round Bars, they offer good resistance to uniform and local corrosion. The UNS S32760 super duplex stainless steel has been developed for aggressive environments.

The use of Super Duplex UNS S32760 Rods involves extended exposure to temperatures of more than 572 degrees Fahrenheit, so it isn't recommended. Although the chemical compositions of 2507 and S32760 are similar, the latter is slightly more copper and tungsten. This round bar has 25% chromium, 4% molybdenum, and 7% nickel and has excellent mechanical properties. In many cases, Alloy 2507 Rod material can be used to achieve the same design strength as a thicker nickel alloy when it comes to a lighter gauge. There are a wide range of applications for Super Duplex UNS S32760 Rods, including oil and gas industry equipment, offshore platforms, heat exchangers, process and service water systems, fire-fighting systems, injection and ballast water systems, and many more.

In the Metal Market, Super Duplex Steel 32760 Round Bars have been marketed as corrosion-resistant steel, as they do not rust, stain, or corrode as easily as carbon steel and other metals. There are many applications and uses of the Super Duplex UNS S32760 Round bars. There are many industries that use the Super Duplex UNS S32750 Round bar as their main product, including Pulp and Paper, Oil and Gas, Petrochemicals, and Chemicals. As well as lifting and pulley equipment, these round bars are suitable for different environments and temperatures. Super Duplex Steel, 32760 Round Bars products, are well suited for these environments and temperatures. Our company offers Nickel-based and Titanium-based bars, mainly Stainless Steel bars (Martensitic, Duplex, Super-Duplex, Austenitic, and Ferritic), as well as Carbon-based types.

CITIES WE DELIVER

Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam, Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar, Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh

SPECIFICATIONS OF SUPER DUPLEX STEEL F55 - UNS S32760 ROUND BAR:

Grade	UNS S32760, Super Duplex Steel
Specification	EN, DIN, JIS, ASTM, BS, ASME, AISI
Standard	ASTM A182, A479, ASME SA182, SA479
Size	6 mm to 120 mm
Diameter	6 mm to 350 mm Diameter
Thickness	100 mm to 600 mm Length
Tolerance	+/-0.2 mm or as per clients’ requirements
Length	1 Meter to 6 Meters, Custom cut lengths
Finish	Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish , BA Finish
Form	Round Bars, Square Bars, Flat Bars, Threaded Bars, Hollow Bars, Hexagonal Bars, Triangular Bars, Hex, Rectangle, Flat, Ingot, etc
Application	Most commonly used in petroleum refineries, Boilers, Heat exchangers, Condensers, Pipelines, Cooling towers, Steam exhausts, Electric generation plants, On occasion will be found in fertilizer and chemical plants.

Chemical Composition:

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N	Fe
S32760	0.05 max	1.00 max	1.00 max	0.030 max	0.010 max	24.00 – 26.00	3.00 – 4.00	6.00 – 8.00	0.20 – 0.30	57.61 min

Mechanical Properties:

Grades	Density (g/cm 3)	Density (lb/in 3)	Melting Point (°C)	Melting Point (°F)
S32760	7.8	0.281	1350	2460

Physical Properties of S32750/S32760 Super Duplex Steel Round Bar

Density	lb/in3	0.28
Modulus of Elasticity	psi x 106	29
Coefficient of Thermal Expansion 68-212°F/°F	x10-6/°F	7.2
Thermal Conductivity	Btu/h ft °F	8.7
Heat Capacity	Btu/lb/°F	0.12
Electrical Resistivity	W-in x 10-6	31.5

Super Duplex Steel 32760 Round Bars Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Super Duplex S32760	1.4410	S32760

Material & Grade :

Duplex & Super Duplex Steel:

Grade: UNS F44, F45, F51, F53, F55, F60, F61

Other grades also available :

Stainless Steel :

Grade: 304, 304L, 304H, 309, 309S, 316, 316L, 316H, 310, 310S, 317, 317L, 321, 347, 904L

Monel :

Grade: Monel 400, Monel K500

Alloy Steel:

Grade : WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91

Incoloy :

Grade: Incoloy 800, Incoloy 800H, Incoloy INCOLOY 800HT

Hastalloy :

Grade: Hastalloy C22, Hastalloy C276

Titanium :

Grade: Gr1, Gr2, Gr3, Gr5, Gr7, Gr11

Carbon Steel :

Grade: WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70

Nickel Alloy :

Grade: Nickel 200, Nickel 201

DIMENSIONS OF SUPER DUPLEX F55 - UNS S32760 ROUND BAR :

Super Duplex 32760 Round Bar Size Dimensions
Metric		US Bar		ASTM/ Canadian		Japanese
Bar Size	Diam. (mm)	Bar Size	Diam. (Inch)	Bar Size	Diam. (mm2)	Bar Size	Diam. (mm)
5	5	#2	0.250	10M	100	6	6
5.5	5.5	#3	0.375	15M	200	10	10
6	6	#4	0.500	20M	300	13	13
7	7	#5	0.625	25M	500	16	16
8	8	#6	0.750	30M	700	19	19
9	9	#7	0.875	35M	1000	22	22
10	10	#8	1.000	45M	1500	25	25
11	11	#9	1.125	55M	2500	29	29
12	12	#10	1.250	32	32
14	14	#11	1.375	35	35
16	16	#12	1.500	38	38
18	18	#13	1.625	41	41
20	20	#14	1.750	44	44
22	22	#15	1.875	48	48
25	25	#16	2.000	51	51
28	28	#18	2.250	57	57
32	32
36	36
40	40
44	44
50	50

SIZE OF ASTM A479 TYPE F55 - UNS S32760 SUPER DUPLEX ROD :

Size		Chucked true to OD				Chucked true to ID
OD, mm	ID, mm	Max. OD, mm<	Min. ID, mm	Max. OD, in.	Min. ID, in.	Max. OD, mm	Min. ID, mm	Max. OD, in.	Min. ID, in.
32	20	31	21.9	1.220	0.862	30	21	1.185	0.827
32	16	31	18	1.220	0.709	30	17	1.181	0.669
36	25	35	26.9	1.378	1.059	34.1	26	1.343	1.024
36	20	35	22	1.378	0.866	34	21	1.339	0.827
36	16	35	18.1	1.378	0.713	33.9	17	1.335	0.669
40	28	39	29.9	1.535	1.177	38.1	29	1.500	1.142
40	25	39	27	1.535	1.063	38	26	1.496	1.024
40	20	39	22.1	1.535	0.870	37.9	21	1.492	0.827
45	32	44	33.9	1.732	1.335	43.1	33	1.697	1.299
45	28	44	30	1.732	1.181	43	29	1.693	1.
45	20	44	22.2	1.732	0.874	42.8	21	1.685	0.827
50	36	49	38	1.929	1.496	48	37	1.890	1.457
50	32	49	34.1	1.929	1.343	47.9	33	1.886	1.299
50	25	49	27.2	1.929	1.071	47.8	26	1.882	1.024
56	40	55	42	2.165	1.654	54	41	2.126	1.614
56	36	55	38.1	2.165	1.500	53.9	37	2.122	1.457
56	28	55	30.3	2.165	1.193	53.7	29	2.114	1.142
63	50	62	51.9	2.441	2.043	61.1	51	2.406	2.008
63	45	62	47	2.441	1.850	61	46	2.402	1.811
63	40	62	42.2	2.441	1.661	60.8	41	2.394	1.614
63	36	62	38.3	2.441	1.508	60.7	37	2.390	1.457
63	32	62	34.4	2.441	1.354	60.6	33	2.386	1.299
71	56	69.9	58	2.752	2.283	68.9	57	2.713	2.244
71	45	69.9	47.3	2.752	1.862	68.6	46	2.701	1.811
71	40	69.9	42.4	2.752	1.669	68.5	41	2.697	1.614
71	36	69.9	38.5	2.752	1.516	68.4	37	2.693	1.457
75	60	73.8	62	2.906	2.441	72.8	61	2.866	2.402
75	50	73.8	52.2	2.906	2.055	72.6	51	2.858	2.008
75	40	73.8	42.5	2.906	1.673	72.3	41	2.846	1.614
80	63	78.8	65	3.102	2.559	77.8	64	3.063	2.520
80	50	78.8	52.4	3.102	2.053	77.4	51	3.047	2.008
80	45	78.8	47.5	3.102	1.870	77.3	46	3.043	1.811
80	40	78.8	42.6	3.102	1.677	77.2	41	3.039	1.614
85	67	83.7	69.1	3.295	2.720	82.6	68	3.252	2.677
85	55	83.7	57.4	3.295	2.260	82.3	56.0	3.240	2.205
85	45	83.7	47.6	3.295	1.874	82.1	46.0	3.232	1.811
90	71	88.6	73.1	3.488	2.878	87.6	72.1	3.449	2.839
90	63	88.6	65.3	3.488	2.571	87.3	64.0	3.437	2.520
90	56	88.6	58.5	3.488	2.303	87.1	57.0	3.429	2.244
90	50	88.6	52.6	3.488	2.071	87.0	51.0	3.425	2.008
95	75	93.5	77.3	3.681	3.041	92.4	76.2	3.641	2.997
95	67	93.5	69.3	3.681	2.728	92.2	68.0	3.630	2.677
95	50	93.5	52.7	3.681	2.075	91.8	51.0	3.614	2.008
100	80	98.5	82.3	3.878	3.240	97.4	81.2	3.835	3.197
100	71	98.5	73.4	3.878	2.890	97.2	72.1	3.827	2.839
100	63	98.5	65.5	3.878	2.579	97.0	64.0	3.819	2.520
100	56	98.5	58.7	3.878	2.311	96.8	57.0	3.811	2.244
106	80	104.4	82.5	4.110	3.248	103.1	81.2	4.059	3.197
106	71	104.4	73.5	4.110	2.894	103.0	72.1	4.055	2.839
106	63	104.4	65.7	4.110	2.587	102.7	64.0	4.043	2.520
106	56	104.4	58.9	4.110	2.319	102.5	57.0	4.035	2.244
112	90	110.3	92.5	4.343	3.642	109.2	91.4	4.299	3.598
112	80	110.3	82.6	4.343	3.252	108.9	81.2	4.287	3.197
112	71	110.3	73.7	4.343	2.902	108.7	72.1	4.280	2.839
112	63	110.3	65.8	4.343	2.591	108.5	64.0	4.272	2.520
118	90	116.2	92.7	4.575	3.650	114.9	91.4	4.524	3.598
118	80	116.2	82.8	4.575	3.260	114.6	81.2	4.512	3.197
118	71	116.2	73.8	4.575	2.906	114.5	72.1	4.508	2.839
118	63	116.2	66.0	4.575	2.59	114.2	64.0	4.496	2.520
125	100	123.1	102.7	4.846	4.043	121.9	101.5	4.799	3.996
125	90	123.1	92.8	4.846	3.654	121.7	91.4	4.791	3.598
125	80	123.1	82.9	4.846	3.264	121.4	81.2	4.780	3.197
125	71	123.1	74.0	4.846	2.913	121.3	72.1	4.772	2.839
132	106	130.0	108.8	5.118	4.283	128.8	107.6	5.071	4.236
132	90	130.0	93.0	5.118	3.661	128.4	91.4	5.055	3.598
132	80	130.0	83.1	5.118	3.272	128.1	81.2	5.043	3.197
132	71	130.0	74.2	5.118	2.921	121.2	72.1	5.035	2.839
140	112	137.9	115	5.429	4.528	136.6	113.7	5.378	4.476
140	100	137.9	103.1	5.429	4.059	136.3	101.5	5.366	3.996
140	90	137.9	93.2	5.429	3.669	136.1	91.4	5.358	3.598
140	80	137.9	83.3	5.429	3.280	135.8	81.2	5.346	3.197
150	125	147.7	128.1	5.81	5.043	146.5	126.9	5.768	4.996
150	106	147.7	109.3	5.815	4.303	146	107.6	5.748	4.236
150	95	x147.7	98.4	5.815	3.874	145.7	96.4	5.736	3.795
150	80	147.7	83.6	5.815	3.291	145.3	81.2	5.720	3.197
160	132	157.6	135.3	6.205	5.327	156.3	134	6.154	5.276
160	122	157.6	125.4	6.205	4.937	156	123.8	6.142	4.874
160	112	157.6	115.5	6.205	4.547	155.8	113.7	6.134	4.476
160	90	157.6	94.0	6.205	3.701	155.2	91.4	6.110	3.598
170	140	167.4	143.5	6.591	5.650	166	142.1	6.535	5.594
170	130	167.4	133.6	6.591	5.260	165.8	132	6.528	5.197
170	128	167.4	131.6	6.591	5.181	165.7	130	6.524	5.118
170	118	167.4	121.7	6.591	4.791	165.5	119.8	6.516	4.717
170	106	167.4	109.8	6.591	4.323	165.2<	107.6	6.504	4.236
170	100	167.4	103.9	6.591	4.091	165	101.5	6.496	3.996
180	150	177.3	153.6	6.980	6.047	176	152.3	6.929	5.996
180	140	177.3	143.7	6.980	5.657	175.7	142.1	6.917	5.594
180	125	177.3	128.9	6.980	5.075	175.3	126.9	6.902	4.996
180	100	177.3	104.1	6.980	4.098	174.7	101.5	6.878	3.996
190	160	187.1	163.8	7.366	6.449	185.7	162.4	7.311	6.394
190	150	187.1	153.9	7.366	6.059	185.5	152.3	7.303	5.996
190	132	187.1	136	7.366	5.354	185.1	134	7.287	5.276
200	170	197.0	173.9	7.756	6.846	195.6	172.6	7.701	6.795
200	160	197.0	164	7.756	6.457	195.4	162.4	7.693	6.394
200	150	197.0	154.1	7.756	6.067	195.2	152.3	7.685	5.996
200	140	197.0	144.2	7.756	5.677	194.9	142.1	7.673	5.594
212	170	208.8	174.2	8.220	6.858	207.2	172.6	8.157	6.795
212	150	208.8	154.4	8.220	6.079	206.6	152.3	8.133	5.997
212	130	208.8	134.6	8.220	5.299	206.2	132	8.118	5.197
224	180	220.6	184.4	8.685	7.260	218.9	182.7	8.618	7.193
224	140	220.6	144.8	8.685	5.701	217.9	142.1	8.579	5.594
236	190	232.4	194.6	9.150	7.661	230.7	192.9	9.083	7.594
236	150	232.4	155.0	9.150	6.102	229.7	152.3	9.043	5.996
250	200	246.2	204.9	9.693	8.067	244.3	203.0	9.618	7.992
275	200	268.9	205.4	10.587	8.087	266.5	203.0	10.492	7.992

ASTM A276 S32760 ROUND BAR STANDARDS

Grade

EN 10088-3

EN 10272

AD2000-

W2/W10

ASTM A 479

ASME SA 479

NACE MR 0175

ASTM A276 UNS S32760 Round Bar

20-450 mm

20-160 mm

-

20-450 mm

Independent of size

AVAILABLE STOCK OF SUPER DUPLEX STEEL F55 - UNS S32760 ROUND BAR :

Products	UNS	DIN
Super Duplex Steel S32760 Bar Super Duplex Steel 32760 Bar	UNS S32760 Bars	1.4501 Bars
Super Duplex Steel S32760 Rod Super Duplex Steel 32760 Rod	UNS S32760 Rods	1.4501 Rods
Super Duplex Steel S32760 Flat Bar Super Duplex Steel 32760 Flat Bar	UNS S32760 Flat Bars	1.4501 Flat Bars
Super Duplex Steel S32760 Square Bar Super Duplex Steel 32760 Square Bar	UNS S32760 Square Bars	1.4501 Square Bar
Super Duplex Steel S32760 Hex Bar Super Duplex Steel 32760 Hex Bar	UNS S32760 Hex Bars	1.4501 Stud Hex Bar

Product Features:

A corrosion-resistant material
Measurements that are accurate
Suitable for high pressures and temperatures
The finish is rust-proof
Distribute stress evenly

SUPER DUPLEX F55 - UNS S32760 PRICE PER KG (AS PER DEMAND AND MANUFACTURER):

Description	Price Per Unit (INR)	Price in USD	Price in EURO
SAF 32760 Round Bar (Hot Worked Rolled),mbr-sanmac32760-35 Fl-1-1700	INR 512 / Unit	USD $ 6.95	€ 5.81
DSS Round Bar (Hot Worked Rolled),mbr-sanmac32760-40 Fl-1-1250	INR 512 / Unit	USD $ 6.95	€ 5.81
32760 Round Bar (Hot Worked Rolled),mbr-sanmac32760-20 Fl-2-2200	INR 514 / Unit	USD $ 6.98	€ 5.83
Super Duplex Steel Bar (Hot Worked Rolled),mbr-sanmac32760-50 Fl-1-1600	INR 514 / Unit	USD $ 6.98	€ 5.83
DSS Round Bar (Hot Worked Rolled),mbr-sanmac32760-40 Fl-2-1650	INR 514 / Unit	USD $ 6.98	€ 5.83
32760 Round Bar (Hot Worked Rolled),mbr-sanmac32760-35 Fl-1-1500	INR 514 / Unit	USD $ 6.98	€ 5.83
SAF 32760 Round Bar (Hot Worked Rolled),mbr-sanmac32760-60 Fl-1-0500	INR 514 / Unit	USD $ 6.98	€ 5.83

MACHINABILITY:

A high-speed steel tool can be used to cut AISI 316 steel in the same way as an AISI 316 tool.
Using carbide-tipped tools will require 40% less cutting speed than that of AISI 316 in roughing operations and 20% less for finishing operations.

FABRICABILITY:

A plastic deformation is initiated with nearly twice the force needed as compared to AISI 304L and 316L.
It is as easy to deform stainless steel beyond yield strength as it is in austenitic stainless steel.
It can be cold bent to 25% deformation without requiring further heat treatment.
If the service conditions are susceptible to SCC, bending should be followed by annealing.
It is recommended that hot bending be carried out in the range of 950-1100 deg C followed by quench annealing.
Using normal expanding methods should not be used when expanding its tubes, since a higher initial force is required and it should be carried out in one operation.

WELDABILITY:

It can be welded by Manual Metal Arc Welding (MMAW) using covered electrodes, Gas Metal Arc Welding (GMAW), and Gas Metal Arc Cutting (GMCC).
The heat input should be between 0.5 and 2.5 k1/mm
A maximum temperature of 150 degrees Celsius should be maintained during the interpass.
Heat treatment after welding is normally not required as a preheating step.
There is usually no need for preheating or post-welding heat treatment9.
It is easy to weld carbon steels, stainless steels, and nickel alloys.

CORROSION RESISTANCE:

Compares favorably with AISI 316L and 317L for general corrosion resistance
As per ASTM A262 Practice E-Strauss Test, welded joints easily pass intergranular corrosion testing.
Pitting and crevice attack resistance are better than 304 and 316 at higher temperatures and chloride contents.
A combination of high strength, hardness, and corrosion resistance makes 32760 highly corrosion fatigue and erosion/corrosion resistant.

Testings (Destructive, Non Destructive):

Testing for Positive Material Identification (PMI)
Spectroscopic Analysis of Chemicals
Testing of mechanical properties such as tensile strength, elongation, and area reduction
Test at the micro level
Test of macros
Test of hardness
Test for Pitting Resistance
Test for intergranular corrosion (IGC)
Test for flare-ups
Test for flattening
Test of hydrostatic pressure
Test for hydrogen-induced cracking (HIC), NACE TM0284
NACE TM 0177, Sulfide Stress Corrosion Cracking
Test of radiography
DP Test (Dye Penetrant Test)
The ultrasonic test (UT)
Testing with Eddy Currents
Test of Impact
Test for bends

Packing:

Since international shipments have to go through several channels to reach the final destination, we take extra care to pack them properly.

Different ways in which our goods are packed depending on the product. These are some of the ways we pack our goods:

Shrink-wrapped
Wooden Boxes
Wooden Pallets
Wooden Crates
Carton boxes

APPLICATION:

The oil and gas industry.
Pumps and pipework for polymerization reactors in the petrochemical industry
Platforms offshore (heat exchangers, process and service water systems, firefighting systems, and injection and ballast water systems)
Industries involved in chemical processing (heat exchangers and vessels)
Plants for desalinating seawater (high-pressure RO plants)
Pumps for recirculation of fertilizers (recirculation tanks, sedimentation tanks, phosphate reactors)
FGD systems for the power industry
Systems for utility and industrial scrubbers (absorber towers, ducting, piping)
(Hot slurry pipe work, acid leach mining)
Pipelines for sewage (critically important.)
Pressure vessels (engineering applications)

Super Duplex S32760 Round Bars

Table of Content

Product Specification

Chemical Composition

Mechanical Composition

Physical Properties